Arial
Wingdings
Monotype Sorts
Symbol
Letter
PRIV
Display
Building Envelope Building Envelope
Wall Wall
Drag endpoint to another wall section. Intersections between walls clean up automatically.
Vis_SAEC.chm!#31842 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`)Select or type the thickness of the wall. Wall &Thickness `050 mm;100 mm;150 mm;200 mm;250 mm;300 mm;150 mm.
`)Select or type the reference line offset. &Reference Line Offset `X-150 mm;-125 mm;-100 mm;-75 mm;-50 mm;-25 mm;0 mm;25 mm;50 mm;75 mm;100 mm;125 mm;150 mm
`&Select or type the height of the wall. Wall &Height `D2 m;2.1 m;2.2 m;2.3 m;2.4 m;2.5 m;2.6 m;2.7 m;2.8 m;2.9 m;3 m;2.6 m.
`%Select or type the length of the wall Wall &Length `$1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.
Wall &Justification Select wall justification. Centered;Edge;Custom Edge
Curved;Straight Select wall segment shape. Wall &Segment Straight
Wall &Radius `&Select or type the height of the wall. 3 m;4 m;5 m;6 m;7 m;8 m;4 m.
Building Component ShapeClass `.String value of User.ShapeClass for reporting.
Wall ShapeType `-String value of User.ShapeType for reporting.
SubShapeType `0String value of User.SubShapeType for reporting.
Classification `@Enter the identifier, as specified by the classification source.
Classification source `JEnter the name of the specific standard or system used for classification.
Wall type ID `6Enter the identifier for the wall's construction type.
Type description `5Enter a description for the wall's construction type.
Extend to structure `5Enter true if the wall connects to a structure above.
Exterior wall `9Specify whether the wall is an interior or exterior wall. Interior;Exterior
Fire rating `KEnter the designer specified fire rating as a duration, such as 30 minutes.
0=Unknown, 1=Wall
0=None, 1=Corner, 2=T
Within radius of User.Fuzz
`+Within distance User.Fuzz of being on line.
Shape Identifier
Wall
/CLEANUP=Begin
/CLEANUP=End
Wall,Drag,endpoint,another,section,Intersections,between,walls,clean,up,automatically,Shell,Structure,layouts,house,frames,building,schematics
`&{5D50005D-537C-4738-9C46-130C74335A6D}
Original Design Width
Original Design Height
`-Design scale value. Multiply hardcoded values
Calculated new BeginX value
Calculated new BeginY value
Calculated new EndX value
Calculated new EndY value
Calculate the ratio of change
`4Sets the DScale value or resets begin and end points
Drag to change radius.
Reposition Text
_Set &Display Options... /WALLPREFS=
F&lip Wall on Reference Line /WALLFLIP=
Add a &Guide /WALLGUIDES=
Add a D&imension /WALLDIMS=
_Double Line Sheet.0!User.LineStyleIndex
Double && Reference Lines Sheet.0!User.LineStyleIndex
Single Line Sheet.0!User.LineStyleIndex
%P&roperties
Building Component
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
0.00
-Meters
Show Units
0.00u
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
0 M
3.00m.
1/16 in.
esc(0)
`.0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
`"Linear Precision Formatting String
`#0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
@UUUUUU%@
Precision && &Units...
Set &As Page Default User.LPrecVal User.LInchPrecVal User.LUnitsVal User.ShowUnitsVal
&Revert To Page Default User.LPrecVal User.LInchPrecVal User.LUnitsVal User.ShowUnitsVal
`1Choose the displayed precision for the dimension. &Precision
`#Choose the units for the dimension. &Units Use Drawing Page's Units;.Feet-Inch (1'-0"");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
`4Choose whether or not to display unit abbreviations. Units &Display Don't Show Units;Show Units
&Precision `1Choose the displayed precision for the dimension. `- 1 in.; 1/2 in.; 1/4 in.; 1/8 in.;1/16 in.
Vis_SAEC.chm!#32943 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`)Select or type the reference line offset. &Reference Line Offset `^-150 mm;-125 mm;-100 mm;-75 mm;-50 mm;-25 mm;0 mm;25 mm;50 mm;75 mm;100 mm;125 mm;150 mm;0 mm.
Curved;Straight Select wall segment shape. Wall &Segment Curved
Wall &Radius `&Select or type the height of the wall. 3 m;4 m;5 m;6 m;7 m;8 m
Curved,wall,Drag,endpoint,another,section,Intersections,between,walls,clean,up,automatically,Shell,Structure,layouts,house,frames,building,schematics
Window Window
`,Store values for all the window frame depths Window Frame Depth `0Frame to wall;100 mm;150 mm;200 mm;250 mm;300 mm
`,Store values for all the window frame widths Window Frame Width `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
`+Store values for all the window sash depths Window Sash Depth `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
`+Store values for all the window sash widths Window Sash Width `A5 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
`2Store values for all the window sill depths inside Window Sill Depth Inside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
`2Store values for all the window sill widths inside Window Sill Width Inside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
`3Store values for all the window sill depths outside Window Sill Depth Outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
`3Store values for all the window sill widths outside Window Sill Width Outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Show all window frames
Show all window sashes
Show all windows closed
`/Draw window frame depths same as wall thickness
Show all window glass panels
Show all window headers
Show all window tags
Show all window sills
Show all window interior sills
Show all window exterior sills
Drag on top of a wall shape. Automatically rotates to align with wall and attaches to wall.
depth.
Vis_SAEC.chm!#31843 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
window
UUUUUU
Window
`{Window,Drag,on,top,wall,Automatically,rotates,align,attaches,Walls,Shell,Structure,layouts,house,frames,building,schematics
`0Sets the DScale value or resets width and height
Window &Height `$Enter a value for the window height. `Q200 mm;300 mm;500 mm;600 mm;700 mm;900 mm;1100 mm;1300 mm;1500 mm;1800 mm;2100 mm
&Reference Line Offset `ZStore the offset from the reference line of the wall over which the window will be placed.
Window &Width `C600 mm;700 mm;800 mm;900 mm;1000 mm;1200 mm;1500 mm;1800 mm;2100 mm `#Enter a value for the window width.
Window &Frame Depth `'Store values for the window frame depth
Window Fra&me Width `'Store values for the window frame width
Window &Sash Depth `&Store values for the window sash depth
Window Sas&h Width `&Store values for the window sash width
Window Sill &Depth Inside `-Store values for the window sill depth inside
Window Sill Width &Inside `-Store values for the window sill width inside
Window Sil&l Depth Outside `.Store values for the window sill depth outside
Window Sill Width O&utside `.Store values for the window sill width outside
Window H&eader Height `+Enter a value for the window header height. `O1100 mm;1300 mm;1500 mm;1800 mm;2100 mm;2300 mm;2350 mm;2400 mm;2700 mm;3000 mm
Window &Along Wall Offset `-Store values for the window along wall offset 0 mm;50 mm;100 mm;150 mm;200 mm
Window &Operator Size `)Store values for the window operator size `?300 mm;350 mm;400 mm;450 mm;500 mm;600 mm;750 mm;900 mm;1050 mm
Window &Spring Height `)Store values for the window spring height `'1050 mm;1150 mm;1200 mm;1350 mm;1500 mm
Window within Wall Offset `-Enter a value for the offset within the wall. Flush Left;Center;Flush Right Center
Window ShapeType `-String value of User.ShapeType for reporting.
Picture Window &Type `"Enter a value for the window type. `YAwning;Casement;Double hung;Garden;Glider;Hopper;Louver;Picture;Pivot;Single hung;Transom
Window Number Enter the window number.
Window type ID `8Enter the identifier for the window's construction type.
Type description `7Enter a description for the window's construction type.
Manufacturer Enter the manufacturer's name.
Model ID or tag `4Enter the manufacturer's model number or identifier.
Model name `$Enter the manufacturer's model name.
List of options `CEnter the manufacturer's options. Separate the options with commas.
Catalog URL `IEnter the Web page address for the manufacturer's online product catalog.
Hardware group `(Enter the hardware group for the window.
Exterior window `=Specify whether the window is an exterior or interior window. Interior;Exterior
_Set &Display Options... /WNDWPREFS=
Reverse &In/Out Opening /OPENINGREVINOUT=
Frame to wall;100 mm;150 mm;200 mm;250 mm;300 mm
10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
5 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Picture
0
-Millimeters
0u
0 MM
900mm.
@TUUUUU%@
Column Column
Place against walls at corner joint. Pilaster parameters can be specified.
ameters.
oor-jamb depth.
Vis_SAEC.chm!#31823 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
T@rk
`wCorner,pilaster,Place,against,walls,joint,parameters,specified,Shell,Structure,layouts,house,frames,building,schematics
`FType the thickness of the wall over which the pilaster will be placed. Wall Thickness
``Type the reference line offset from the inside of the wall over which the window will be placed. Reference Line Offset
Type the width of the pilaster. Pilaster Width
Pilaster Depth Type the depth of the pilaster.
Column ShapeType `-String value of User.ShapeType for reporting.
Pilaster SubShapeType `0String value of User.SubShapeType for reporting.
Material `+Select the type of material for the column. Concrete;Steel;Wood
Column type ID `8Enter the identifier for the column's construction type.
Type description `7Enter a description for the column's construction type.
Pilaster Height Enter the height of the column.
%_P&roperties
Specify from which side of the wall the pilaster protrudes.
Column
Pilaster
wwwww
Place over a wall section. Pilaster parameters can be specified.
pth.
door-jamb depth.
Vis_SAEC.chm!#31835 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`tPilaster,Place,over,wall,section,parameters,specified,Walls,Shell,Structure,layouts,house,frames,building,schematics
Flip Orientation FlipY
Door Frame Width `*Store values for all the door frame widths `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Frame Depth `*Store values for all the door frame depths `0Frame to wall;100 mm;150 mm;200 mm;250 mm;300 mm
Door Panel Thickness `-Store values for all the door panel thickness `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Stop Depth `)Store values for all the door stop depths `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Stop Width `)Store values for all the door stop widths `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Threshold Depth Inside `5Store values for all the door threshold depths inside `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Threshold Width Inside `5Store values for all the door threshold widths inside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Threshold Depth Outside `6Store values for all the door threshold depths outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Threshold Width Outside `6Store values for all the door threshold widths outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Door
Show all door frames
Show all door stops
Show all door swings
Show all doors closed
`-Draw door frame depths same as wall thickness
Show all door panels
Show all door headers
Show all door tags
Show all door thresholds
`*Draw all door swings as: 0 = arc, 1 = line
`!Show all door interior thresholds
`!Show all door exterior thresholds
Vis_SAEC.chm!#31826 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
door
Door
`1-Height/user.dscale/2+Prop.SubVisDoorFrameDepth/2 `--Height/user.dscale+Prop.SubVisDoorFrameDepth
`yDoor,Drag,on,top,wall,Automatically,rotates,align,attaches,Walls,Shell,Structure,layouts,house,frames,building,schematics
Door &Height `82100 mm;2300 mm;2350 mm;2400 mm;2700 mm;3000 mm;2100 mm. `"Enter a value for the door height.
&Reference Line Offset `XStore the offset from the reference line of the wall over which the door will be placed.
Door &Width `K600 mm;700 mm;800 mm;900 mm;1000 mm;1200 mm;1500 mm;1800 mm;2100 mm;900 mm. `!Enter a value for the door width.
Door &Frame Width `%Store values for the door frame width
Door Fra&me Depth `%Store values for the door frame depth
Door Sto&p Width `$Store values for the door stop width
Door St&op Depth `$Store values for the door stop depth
Door Thre&shold Depth Inside `0Store values for the door threshold depth inside
Door Threshold Width &Inside `0Store values for the door threshold width inside
Door T&hreshold Depth Outside `1Store values for the door threshold depth outside
Door &Threshold Width Outside `1Store values for the door threshold width outside
Door &Panel Thickness `)Store values for the door panel thickness
Door &Leaf Width `$Store values for the door leaf width `?300 mm;350 mm;400 mm;450 mm;500 mm;600 mm;750 mm;900 mm;1050 mm
Door &Spring Height `'Store values for the door spring height `'1050 mm;1150 mm;1200 mm;1350 mm;1500 mm
Door &Along Wall Offset `+Store values for the door along wall offset 0 mm;50 mm;100 mm;150 mm;200 mm
Door &Type `!Select a value for the door type. Single;Double Hung Single
Door within Wall Offset `.Select a value for the offset within the wall. Flush Left;Center;Flush Right Center
Door Open Percentage `+Enter a value for the door open percentage.
Door ShapeType `-String value of User.ShapeType for reporting.
Door type ID `6Enter the identifier for the door's construction type.
Type description `5Enter a description for the door's construction type.
Hardware group `&Enter the hardware group for the door.
Exterior door `9Specify whether the door is an interior or exterior door. Interior;Exterior
Door Number Enter the door number.
_Set &Display Options... /DOORPREFS=
Reverse &Left/Right Opening /OPENINGREVLEFTRIGHT=
Single
Set Swing Angle
Drag endpoint to another exterior wall section. Intersections between walls clean up automatically.
Vis_SAEC.chm!#31829 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`)Select or type the thickness of the wall. Wall &Thickness `(50 mm;100 mm;150 mm;200 mm;250 mm;300 mm
Wall &Radius `&Select or type the height of the wall. `&3 m;4 m;5 m;6 m;7 m;8 m;3 m.;3.0002 m.
Exterior,wall,Drag,endpoint,another,section,Intersections,between,walls,clean,up,automatically,Shell,Structure,layouts,house,frames,building,schematics
Stair Stair
Straight single-flight staircase.
taircase.
Vis_PShr.chm!#26895 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Resize Upper Handrail Extension Resize Lower Handrail Extension
Resize Lower Handrail Extension Resize Upper Handrail Extension
Show Handrails Hide Handrails User.HideRail
Show Stair Break Hide Stair Break User.HideBreak
Show Stair Segment Hide Stair Segment User.HideSegment
Stagger Stair Flight User.StaggerStep User.StaggerCtls
Swap Direction User.SwapDir
Hide Handrails
Hide Stair Break
Flight Separation (Minimum of 25MM.)
Hide Stair Segment
Hide Lower Stair
Number of Treads per flight (Maximum of 8)
Resize Lower Handrail Extension
Resize Upper Handrail Extension
up
down
Stair
Stair Flight Run `.Enter the length of a single stair flight run.
Stair Flight Width `"Enter the width of each staircase.
Flight Separation (Minimum of `4Enter the number of treads for the stair flight run.
`(Number of Treads per flight (Maximum of `4Enter the number of treads for the stair flight run.
Stair ShapeType `-String value of User.ShapeType for reporting.
Purpose `3Enter a description of the stair's primary purpose.
Exit stair `GEnter true if the stair is counted for building code exit requirements.
`,Enter the code minimum width for each tread.
`=Enter the code minimum length for the top handrail extension.
`@Enter the code minimum length for the bottom handrail extension.
`/Enter the code minimum width for the staircase.
`$Toggles visibility of stair segment.
`>Toggles travel of stair segment- to indicate ascent or descent
`4Enter the code minimum run length for the staircase.
`?Contains the maximum number of treads for the given stair size.
`0Contains the actual number of stair treads drawn
`3Contains the width for each individual stair tread.
`'Controls the visibility of treads 1-16.
`(Controls the visibility of treads 17-32.
` Toggles visibility of handrails.
`"Toggles visibility of stair break.
Height
Controls.X1
Controls.X2
Prop.Width
Controls.X1 Controls.X4 Controls.X2 Controls.X5 Controls.X4 Controls.X1 Controls.X5 Controls.X2
staircase, scissor
`_Scissor,staircase,Straight,single,flight,Building,Core,lifts,floor,charts,stair,treads,landings
E1@Fxj
` $xas
g2@Rc?
an8@F/
8NOK@
@Fxj
W/@Fe/³7¶g2@Rc?
pK;*@F
``B1@Fxj
R/@Fe/³7¶g2@Rc?
ye @F 8NOK@
`<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `*Store values for all the door frame widths Door Frame Width
`0Frame to wall;100 mm;150 mm;200 mm;250 mm;300 mm `*Store values for all the door frame depths Door Frame Depth
`<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `-Store values for all the door panel thickness Door Panel Thickness
`<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `)Store values for all the door stop depths Door Stop Depth
`<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `)Store values for all the door stop widths Door Stop Width
`<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `5Store values for all the door threshold widths inside Door Threshold Width Inside
`A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `5Store values for all the door threshold widths inside Door Threshold Depth Inside
`A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `6Store values for all the door threshold widths outside Door Threshold Depth Outside
`A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm `6Store values for all the door threshold widths outside Door Threshold Width Outside
Vis_SAEC.chm!#31827 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`{Double,Drag,on,top,wall,Automatically,rotates,align,attaches,Walls,Shell,Structure,layouts,house,frames,building,schematics
Door &Width `L600 mm;700 mm;800 mm;900 mm;1000 mm;1200 mm;1500 mm;1800 mm;2100 mm;1800 mm. `!Enter a value for the door width.
Door Frame Width `*Store values for all the door frame widths
Door Frame Depth `*Store values for all the door frame depths
Door Stop Width `)Store values for all the door stop widths
Door Stop Depth `)Store values for all the door stop depths
Door Threshold Width Inside `5Store values for all the door threshold widths inside
Door Threshold Depth Inside `5Store values for all the door threshold widths inside
Door Threshold Depth Outside `6Store values for all the door threshold widths outside
Door Threshold Width Outside `6Store values for all the door threshold widths outside
Door &Panel Thickness `/Store values for all the door panel thickness\'
Door &Type `!Select a value for the door type. Double;Double Double Hung Double
Center Flush Left;Center;Flush Right `.Select a value for the offset within the wall. Door within Wall Offset
`5Select or enter a value for the door open percentage. Door Open Percentage
50 mm
20 mm
Double
1800mm.
Flow Equipment Flow Equipment
Elevator dimensions can be specified. Rear door can be shown or hidden.
Vis_PShr.chm!#26887 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Hide Rear Door Show Rear Door User.RearDoor
Prop.DoorWidth Prop.DoorWidth
elevator
Prop.Height User.MinHeight
`kElevator,dimensions,specified,Rear,door,shown,hidden,Building,Core,lifts,floor,charts,stair,treads,landings
Show Rear Door
Cab Door Width (Minimum of 1000MM.)
Cab Height (Minimum of 2600MM.)
Cab Depth (Minimum of 2000MM.)
Cab Width (Minimum of 2300MM.)
Flow Equipment
Elevator
Cab Width (Minimum of `-Enter the desired width for the elevator cab.
Cab Depth (Minimum of `-Enter the desired depth for the elevator cab.
Cab Height (Minimum of `.Enter the desired height for the elevator cab.
Cab Door Width (Minimum of `2Enter the desired width for the elevator cab door.
Flow Equipment ShapeType `-String value of User.ShapeType for reporting.
Elevator SubShapeType `0String value of User.SubShapeType for reporting.
C@Fi4 Reposition Text
Space Space
Use to create a basic room or building layout. Shape can be converted to walls.
alls.
Vis_SAEC.chm!#31841 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
sq. in.
AutoSpaceResize /AREA=
`Lsq. ft.;sq. m.;sq. mm.;sq. cm.;;hectare;sq. km.;sq. in.;sq. yd.;acre;sq. mi.
Space
`&0 uu;0.0 uu;0.00 uu;0.000 uu;0.0000 uu
`mSpace,Drag,onto,each,office,area,assign,identifier,such,number,Resources,Facilties,Management,Boundary,Person
Enter the name Name
`*Enter the unique identifier of this office Space ID
Enter the department name Department
Office `)Select the space use or enter a new value Space Use Office;Conference;Storage;Other
Enter the phone number Phone Number
`3Displays the number of persons occupying this space Occupancy
`$Enter the maximum occupancy capacity Capacity
Enter the unique identifier
`=Displays the location or department which contains this space Belongs To
`%Displays the shape's modify date-time Modified
Location `.String value of User.ShapeClass for reporting. ShapeClass
Space `-String value of User.ShapeType for reporting. ShapeType
`0String value of User.SubShapeType for reporting. SubShapeType
`7Enter the identifier for the space's construction type. Space type ID
`6Enter a description for the space's construction type. Type description
`MSpecify the space as exterior if it is bounded by at least one exterior wall. Exterior space
Enter the height of the space. Space height
`/Enter the space type designation for occupancy. Space type
`KEnter the zones to which the space belongs. Separate the zones with commas. Zones
Displays the area of the space. Calculated area
Drag to move shape text
`!Basepoint for space auto resizing
Auto Si&ze AutoSpaceResize
Ed&it AutoSpaceResize /EDIT=
Convert to &Walls... /CONVERT=
_Set Display &Options... /SPACEPREFS=
Reset &Text Fields /SPACERESETTEXT=
_&Union /SPACEUNION=
Su&btract /SPACESUBTRACT=
I&ntersect /SPACEINTERSECT=
sq. m.
0.0 uu
9.0 sq. m.
Location
Office
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Building Plan\Building Core.vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Building Plan\Walls, Shell and Structure.vss
CAD Drawing CAD Drawing
Door Threshold Width Inside `5Store values for all the door threshold widths inside `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Threshold Depth Inside `5Store values for all the door threshold widths inside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Threshold Depth Outside `6Store values for all the door threshold widths outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Door Panel Thickness `/Store values for all the door panel thickness\' `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Frame Depth `,Store values for all the window frame depths `0Frame to wall;100 mm;150 mm;200 mm;250 mm;300 mm
Window Frame Width `,Store values for all the window frame widths `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Sash Depth `+Store values for all the window sash depths `<10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Sash Width `+Store values for all the window sash widths `A5 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Sill Depth Inside `2Store values for all the window sill widths inside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Sill Width Inside `2Store values for all the window sill widths inside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Sill Depth Outside `3Store values for all the window sill widths outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
Window Sill Width Outside `3Store values for all the window sill widths outside `A0 mm;10 mm;20 mm;30 mm;40 mm;50 mm;60 mm;70 mm;80 mm;90 mm;100 mm
VUUUUU
`Z200 mm;300 mm;500 mm;600 mm;700 mm;900 mm;1100 mm;1300 mm;1500 mm;1800 mm;2100 mm;1300 mm.
600 mm;700 mm;800 mm;900 mm;1000 mm;1200 mm;1500 mm;1800 mm;2100 mm;900 mm.;2100 mm.;200 mm.;2200 mm.;2300 mm.;2600 mm.;2400 mm.
`X1100 mm;1300 mm;1500 mm;1800 mm;2100 mm;2300 mm;2350 mm;2400 mm;2700 mm;3000 mm;2100 mm.
200 mm
`.1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;46200 mm.
Edge
PW-DT
6000MM.
52200MM.
46.20m.
@TUUUUU5@
`.1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;37000 mm.
htr@ýÿÿÿ Calculated new BeginX value
37.00m.
Centered
PcBRTû Q(-DT
z=P@G ëõz=P@G
z=P@F
-90°
9300MM.
3.30m.
Q(-DT
180°
4.80m.
-89.999999988258°
48200MM.
38.90m.
0°
4.00m.
F|fb /CLEANUP=End
-89.999999964779°
-89.999999964781°
39.50m.
PL|Q+>
5.00m.
htr@
2.0943026593163E-15°
48800MM.
90°
3.40m.
`!3 m;4 m;5 m;6 m;7 m;8 m;3.0002 m.
29800MM.
27750MM.
6.34m.
P8-DT
P8-DTû Q(-DT
15600.000002459MM.
12.15m.
PNknTû Q(-DT
19200MM.
3.60m.
P -DTû Q(-DT
6.50m.
-89.99999996478°
10.60m.
-179.99999997652°
6.00m.
FLo&
PpknT
FLo& û&@FLo&
FLo& ÀFLo&
-89.999999988217°
6.30m.
GLo&
FHI1!
Straight
zFs
FHI1! û&@FHI1!
FHI1! ÀFHI1!
-108.86358759424°
4.23m.
GHI1!
Pb9H Q(-DT
31000MM.
P<-DTû Q(-DT
37500MM.
6.20m.
P>-DT
34300MM.
3.20m.
P'-DTû Q(-DT
-89.99999998826°
`-1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;3200 mm.
Fi{IC" Calculated new EndY value
P{V`T
11.35m.
46700MM.
9.85m.
P5-DTû Q(-DT
-89.999999993606°
6.70m.
31300MM.
15.40m.
P(-DTû Q(-DT
40000MM.
18.50m.
24800MM.
15.20m.
Phu@
Phe@G Phe@G
Phe@@Æq Phe@F
8.70m.
htb@G Ñhtb@G
htb@@Æq Ñhtb@F
7.50m.
30000MM.
UUUUUU Calculate the ratio of change
J%f@G J%f@G
J%f@F
21000MM.
9.00m.
24800.000003642MM.
`21 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;3047.9501 mm.
`%3 m;4 m;5 m;6 m;7 m;8 m;2774.3761 mm.
M@FX y<&v:@@d=¥ÔßÿM@FX nFo[
27100MM.
3.05m.
11.00m.
P(Tz@
P(Tj@G P(Tj@G
P(Tj@@Æq P(Tj@F
29799.999993391MM.
10.70m.
P&-DTû Q(-DT
P9-DTû Q(-DT
P<-DT
j5R@G Õj5R@G
j5R@F
28500MM.
3.70m.
`,1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;780 mm.
1.30m.
0.30m.
-89.999999964609°
2.20m.
2.3480199949088E-8°
1.40m.
2.00m.
1.20m.
P#-DTû Q(-DT
P9-DT
28400.000000784MM.
1.60m.
P -DT
35600MM.
2.60m.
P:k!5k)
4.40m.
6.7684054165625E-13°
1.00m.
1.50m.
F<wl\. `,1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;780 mm.
F<wl\.
F<wl\. û&@F<wl\.
F<wl\. ÀF<wl\.
5.20m.
G<wl\.
PRknTû Q(-DT
PRknT
z=P@G XÓ8öz=P@G
21500MM.
2.50m.
-89.999999978915°
2.30m.
15500MM.
21600MM.
6.10m.
0.60m.
PXt9
j5R@G ÂÕj5R@G
j5R@G ÚÕj5R@G
j5R@G WñÕj5R@G
j5R@G Öj5R@G
FVs6 /CLEANUP=Begin
`-1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;3000 mm.
FpIj `-1 m;2 m;3 m;4 m;5 m;6 m;7 m;8 m;3 m.;3000 mm.
FpIj
FpIj û&@FpIj
FpIj ÀFpIj
GpIj
vb'vb'
2.40m.
0.90m.
DD^A9
`S600 mm;700 mm;800 mm;900 mm;1000 mm;1200 mm;1500 mm;1800 mm;2100 mm;650 mm.;700 mm.
0.70m.
qV~B
Q)zj
5.66m.
oV~B
`U600 mm;700 mm;800 mm;900 mm;1000 mm;1200 mm;1500 mm;1800 mm;2100 mm;4000 mm.;3000 mm.
P(-DT
2.80m.
Oiiii
xbF{
_w?*@F>Yhq
an8@F
?F>Yhq
W/@FV
h @FPÅ 8NOK@
pK;*@F>Yhq
R/@FV
ye @FPÅ 8NOK@
2.90m.
Vva1
1.80m.
C@Fg
PYt9
F@Gi|> û&@F@Gi|>
F@Gi|> ÀF@Gi|>
G@Gi|>
F@Gi|>
`$Office;Conference;Storage;Other;Cube Cube
Cube
0 uu
17460
17461
17463
17468
17467
17465
17470
17471
17473
17478
17477
17475
17480
17481
17483
17488
17487
17485
17490
17491
17493
17498
17497
17495
17330
17295
17297
17298
17293
17291
17290
17299
17289
17285
17287
17288
17283
17281
17280
17270
17275
17273
17277
17279
Ht:Mp@
17328
t:Mp@
17326
e0ylE
17324
&1t:Mp@
17322
@HnX, T=@@HnX,
Z-T@@p823
?1t:Mp@
17320
0t:Mp@
17318
91t:Mp@
17316
@R'1t:Mp@
17314
17312
@J+1t:Mp@
17310
=1t:Mp@
17308
17306
@PnX, T=@@PnX,
17304
17302
fN*L
17102
17104
R@@P&r$
F4L:Mp@
17106
17108
T=@@Hi
S:Mp@
17110
17112
#o:Mp@
17114
17116
17118
17120
f:Mp@
17122
L@@Pg
_x:Mp@
17124
17126
17128
Hdv@
17202
17204
17206
TR@@p
17208
Conference
17203
`'Office;Conference;Storage;Other;Kitchen Kitchen
Kitchen
e@@Xu
Storage
d@@tu d@@tu
17115
17117
17113
17415
pxQ@@gD âpxQ@@
17413
pxQ@@ âpxQ@@
17411
17409
pxQ@@ Ãáp6@@HH âpxQ@@
17407
pxQ@@´Ùl6›Í8@@Hó9âpxQ@@
17405
pxQ@@'ùì âpxQ@@p7
17403
`Zoz
17401
P@@Tu
QVu:
17323
D^@@P%iZ.
T@@Hv˜ŸPhU@
PhU@@ PhU@
XlT@@
17315
O@@ty
B!G@@X& B!G@@X&
17311
17313
`%Office;Conference;Storage;Other;Women Women
Women
htR@@@ ÒhtR@@@
`#Office;Conference;Storage;Other;Men
Men
`$Office;Conference;Storage;Other;Mech Mech
Mech
b1C@@Láôù Åb1C@@L
`"Office;Conference;Storage;Other;St
St
Guide
TheDoc
Page-1
Gesture Format
WindowSill
Building
Dim-Arch-Shape
Dim-Architecture
Dimension
LineStyleIndex
LPrec
LUnits
ShowUnits
LInchPrec
IFCPropsInvisible
RefLn
Material
VisWallHeight
VisWallLength
visWallJustify
visWallSegment
Radius
ShapeClass
ShapeType
SubShapeType
Classification
ClassificationSource
ProjectType
TypeDescription
ExtendToStructure
IsExterior
FireRating
RefLn1
Mtrl1
JointType1
RelA1
EndsDontMeet1
ShapeGone1
AngTooSharp1
AngTooBlunt1
EndNotOnLine1
DiffMtrls1
CornerClose1
TClose1
Closed1
Corner1
TJointOpen1
TJointClosed1
RefLn2
Mtrl2
JointType2
RelA2
EndsDontMeet2
ShapeGone2
AngTooSharp2
AngTooBlunt2
EndNotOnLine2
DiffMtrls2
CornerClose2
TClose2
Closed2
Corner2
TJointOpen2
TJointClosed2
Fuzz
WallShape
OverLayT
3D_type
3D_offset
3D_extrude_length
Is_arc
2D_length_check
visWallPriority
visObjectType
visBESelected
CleanupBegin
CleanupEnd
PreviousWidth
CurveSwitch
ControlsY1
visKeywords
visVersion
SolSH
CurveLookup
DWidth
DHeight
DScale
DNewBX
DNewBY
DNewEX
DNewEY
DRatio
DScaler
AntiScale
HasText
WallFill
WallCap
WallRefLine
WallCompGeom1
Hide
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
WatchLength
DrawingUnitFactor
HideArrow
LInchPrecInd
DirArrowSize
DirArrowOffset
LInchPrecVal
VisAecDocument
VisAecVersion
VisAecPage
VisDoorPanelsClosed
VisDoorShowHeader
VisDoorShowPanel
VisDoorShowSwing
VisDoorShowThreshold
VisDoorShowThresIn
VisDoorShowThresOut
VisDoorFrameToWall
VisDoorSwingAs
VisDoorShowFrame
VisDoorShowStop
VisDoorFrameWidth
VisDoorFrameDepth
VisDoorStopWidth
VisDoorStopDepth
VisDoorThresDepthIn
VisDoorThresWidthIn
VisDoorThresDepthOut
VisDoorThresWidthOut
VisDoorPanelThickness
VisWndwShowFrame
VisWndwShowSash
VisWndwFrameToWall
VisWndwShowHeader
VisWndwShowSill
VisWndwShowSillIn
VisWndwShowSillOut
VisWndwFrameDepth
VisWndwFrameWidth
VisWndwSashDepth
VisWndwSashWidth
VisWndwSillDepthIn
VisWndwSillWidthIn
VisWndwSillDepthOut
VisWndwSillWidthOut
visSpaceUnits
visSpacePrecision
visSpaceLabel
visSpaceNameLabel
visSpaceUseLabel
Wall.16
Wall.23
Wall.37
Wall.44
Wall.51
Wall.58
Wall.65
Wall.72
Wall.79
Wall.86
Wall.93
Wall.100
Wall.107
Wall.114
Wall.121
Wall.128
Wall.135
Wall.142
Wall.149
Wall.156
Wall.163
Wall.170
Wall.177
Wall.184
Wall.191
Wall.198
Wall.205
Wall.212
Wall.219
Wall.226
Wall.233
Wall.240
Wall.247
WindowHeader
Wall.261
Wall.268
Wall.275
Wall.282
Wall.289
Wall.296
Curved wall
Wall.303
Wall.310
Wall.317
Wall.324
Wall.331
Wall.338
Wall.345
Wall.352
Wall.359
WindowFrame
Wall.380
Wall.387
Wall.394
Wall.401
Wall.408
Wall.415
Wall.422
Wall.429
WindowSash
Wall.443
Wall.450
Wall.457
Wall.464
Wall.471
Wall.485
Wall.492
Wall.499
WindowGlass
VisWndwClosed
VisWndwShowGlass
VisWndwShowTag
Wall.534
Wall.541
Wall.548
Wall.555
Wall.562
Wall.569
Wall.576
Wall.583
Wall.590
Wall.597
Wall.604
Wall.611
Wall.618
Wall.625
Wall.632
Wall.639
Wall.646
Wall.653
Wall.660
Wall.667
Wall.674
Wall.681
Wall.688
Wall.695
Wall.702
Wall.709
Wall.716
Wall.723
Wall.730
Wall.744
TextAng
WallOpening
LinkedToWall
3D_model_id
VisWndwInWallOffset
SubVisWndwShowFrame
SubVisWndwShowSash
VisWndwOpenPercent
VisWallLineWeight
VisWallLineWeightInch
VisWallLineColor
VisWallLinePattern
SubVisWndwClosed
SubVisWndwFrameToWall
SubVisWndwShowGlass
SubVisWndwShowHeader
SubVisWndwShowTag
SubVisWndwShowSill
SubVisWndwShowSillIn
SubVisWndwShowSillOut
VisWallRefLn
visWndwUIDisableCodes
BottomBow
TopBow
PreviousWallParam
PreviousWallDir
TriggerOpeningLink
visWndwHeight
SubType
SubVisWndwFrameDepth
SubVisWndwFrameWidth
SubVisWndwSashDepth
SubVisWndwSashWidth
SubVisWndwSillDepthIn
SubVisWndwSillWidthIn
SubVisWndwSillDepthOut
SubVisWndwSillWidthOut
VisWndwHeaderHeight
VisWndwAlongWallOffset
VisWndwOperator
VisWndwSpring
VisJustifacation
WndwNumber
Manufacturer
ModelID
ModelName
OptionsList
CatalogURL
HardwareGroup
Overhang
visBESnapObject
FrameWidth
SashWidth
Corner pilaster
SubShapeLocPinY
Window.763
Window.773
Door Threshold
Door Header
Door Frame
Door Swing
Door Panel
VisDoorShowTag
VisIsDouble
VisDoorInWallOffset
SubVisDoorShowFrame
visDoorUIDisableCodes
SubVisDoorShowStop
SubVisDoorPanelsClosed
SubVisDoorShowSwing
SubVisDoorFrameToWall
SubVisDoorShowPanel
SubVisDoorShowHeader
SubVisDoorShowTag
SubVisDoorShowThreshold
JustfyLookup
SubVisDoorSwingAs
SubVisDoorShowThresIn
SubVisDoorShowThresOut
VisDoorHeight
SubVisDoorFrameWidth
SubVisDoorFrameDepth
SubVisDoorStopWidth
SubVisDoorStopDepth
SubVisDoorThresDepthIn
SubVisDoorThresWidthIn
SubVisDoorThresDepthOut
SubVisDoorThresWidthOut
SubVisDoorPanelThickness
VisDoorLeaf
VisDoorSpring
VisDoorAlongWallOffset
VisDoorOpenPercent
DoorNumber
VisDoorShowSwingAsArc
VisDoorShowSwingAsLine
Door.819
Window.832
Door.842
Window.855
Window.865
Door.875
Door.888
Window.901
Door.911
Window.924
Window.934
Window.944
Door.954
Door.967
Window.980
Door.990
Door.1003
Window.1016
Window.1026
Window.1036
Door.1046
Door.1059
Door.1072
Window.1085
Window.1095
Door.1105
Window.1118
Window.1128
Window.1138
Pilaster.1148
Window.1151
Window.1161
Window.1171
Pilaster.1181
Pilaster.1184
Window.1187
Window.1197
Window.1207
Window.1217
Window.1234
Window.1244
Window.1257
Window.1267
Window.1277
Window.1287
Window.1297
Window.1307
Window.1317
Window.1327
Window.1337
Window.1347
Window.1357
Window.1367
Window.1377
Window.1387
Window.1397
Pilaster.1435
Pilaster.1438
Pilaster.1441
Pilaster.1444
Door.1447
Window.1460
Door.1470
Window.1483
Door.1493
Window.1506
Window.1516
Door.1526
Door.1539
Window.1552
Window.1562
Door.1572
Door.1585
Door.1598
Window.1611
Window.1621
Window.1631
Window.1641
Window.1651
Door.1661
Door.1674
Door.1687
Window.1700
Window.1710
Window.1720
Door.1730
Door.1743
Door.1756
Pilaster.1769
Pilaster.1772
Exterior wall
Window.1775
Window.1425
Window.1785
Window.1795
Window.1805
Window.1815
Window.1825
Window.1835
Window.1845
Window.1855
Window.1865
Window.1875
Window.1885
Window.1895
Window.1905
Window.1915
Window.1925
Window.1935
Window.1945
Window.1955
Window.1965
Window.1975
Window.1985
Window.1995
Window.809
Door.2005
Door.2018
Window.2031
Window.2041
Door.2051
Window.2064
Window.2074
Door.2084
Door.2097
Door.2110
Door.2123
Door.2136
Door.2383
Door.2396
Wall.2172
Door.2179
Window.2192
Door.2202
Window.2215
Door.2149
Window.2162
Door.2225
Window.2238
Door.2248
Window.2261
Door.2271
Window.2284
Window.2294
Door.2304
Door.2317
Window.2330
Scissor staircase
FlightRun
Width
StairSeparation
TreadNumber
Hide1
Hide2
StairPurpose
ExitStair
MinTreadWidth
MinHandrailExtTop
MinHandrailExtBot
MinStairWidth
HideSegment
SwapDir
MinRunLength
MaxTreadNumber
ActualTreadNumber
ActualTreadWidth
ShowTread16
ShowTread32
HideRail
HideBreak
StaggerCtls
DoStaggerCtls
GuardHeight
WatchCHRight
WatchCHLeft
SwapCtls
DoSwapCtls
GuardFlightWidth
SwapCtl1
DoSwapCtl1
Arrow1Begin
StaggerStep
MinFlightSeparation
FltSep
Arrow2Begin
RailRightX
RailLeftX
RailRightMin
RailLeftMin
WatchSwap
ArrowLoc
Scissor staircase.2350
Door.2360
Window.2373
Door.2409
Wall.2422
Door.2429
Door.2442
Door.2455
Door.2468
Door.2498
Door.2511
Door.2524
Door.2537
Door.2550
Door.2563
Door.2576
Window.2589
Door.2599
Window.2612
Door.2622
Window.2635
visFMArea
Door.2668
Window.2681
Door.2645
RearDoor
MinWidth
MinDepth
MinHeight
GuardDoorWidth
DoorWidthMin
GuardCabHeight
Depth
DoorWidth
Elevator.2662
Elevator.2666
Elevator.2693
Elevator.2697
Elevator.2701
Wall.2705
visFMAreaDisplay
visFMAutoSpace
visSqUnits
visFMNameDisplay
visFMAreaPrec
visFMUseDisplay
Name
LocationID
Department
PhoneNumber
OccupantCount
OccupantCapacity
BelongsTo
Modify
ExteriorSpace
SpaceHeight
SpaceType
Zones
visArea
Space.2756
Space.2713
Space.2714
Space.2715
Space.2716
Space.2717
Space.2718
Space.2719
Space.2720
Space.2721
Space.2722
Space.2723
Space.2724
Space.2725
Space.2726
Space.2727
Space.2728
Space.2729
Space.2730
Space.2731
Space.2732
Space.2733
Space.2734
Space.2735
Space.2736
Space.2737
Space.2738
Space.2739
Space.2740
Space.2741
Space.2742
Space.2743
Space.2744
Space.2745
Space.2746
Space.2747
Space.2748
Space.2749
Space.2750
Space.2751
Space.2752
Space.2753
Space.2754
Space.2755
Space.2757
Space.2758
Space.2759
Space.2760
Space.2761
Space.2762
Space.2763
Space.2764
Space.2765
Space.2766
Space.2767
Space.2768
Space.2769
Space.2770
Space.2771
Space.2772
Space.2773
Space.2774
Space.2775
Space.2776
Space.2777
Space.2778
Space.2779
Space.2780
Space.2781
Space.2782
Space.2783
Space.2784
Space.2785
Space.2786
Space.2787
Space.2788
Space.2789
Space.2790
Space.2791
Space.2792
Space.2793
Space.2794
Space.2795
Space.2796
Space.2797
Space.2798
Space.2799
Space.2800
Space.2801
Space.2802
Space.2803
Space.2804
Space.2805
Space.2806
Space.2807
Space.2808
Space.2809
Space.2810
Space.2811
/INITIALIZE